door chime doesn't work after R/S install

I installed a Omega Comfort Start in a 2001 Sunfire and now the door chime doesn't work. I didn't mess with the door pins, and ideas?

are you talking about the chime not working after you remote start the car??? or it doesnt work at all anymore...Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

The door chime works through the speaker system of the car along with the databus wire from the stereo. When you bypassed the Passlock II system, did you do anything to the databus wire ?? Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

if it doesnt work at all there is a problem.  if it doesnt work during RS, its probably because the radios accy wire isnt powered up.  just a guess.  i know the radio doesnt have to be on, but if the whole circuit is off, then i dont think the radio can run the amp to power the chime.  i know on cavaliers the radio accy is seperate from the blower controls, like most GM's.MECP certified installer

the remote start doesn't have anything to do with it then. I replaced the radio too. abd if it goes through the speaker the it's not gonna work. is there a fix?

The databus wire went through the OEM stereo and when you removed the stereo, you lost the door chime function. There are modules available for the door chime to be retained through a special wiring harness. These harnesses run between $ 80 - $100 for this harness. Here's some more information on the system that you have:  GM Class 2 Data Bus Information

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA