00’ Maxima problems.. help

Home / the12volt's Install Bay / Car Security and Convenience / 00’ Maxima problems.. help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

proinstall

Copper - Posts: 77

Joined: January 07, 2004

Location: United States

Posted: April 04, 2004 at 4:56 PM / IP Logged

Okay.. about 1 week ago I put in a 2WSS-AS Compustar in this 00' Nissan Maxima.. it worked well no problems..

1 week later (today) all of a sudden his guage cluster fuse pops.. about 5 seconds after you put it in drive while the car is running.... I've tried it again and again with about 10 fuses.. also, the battery wont charge and the alternator was tested to be just fine.. any ideas? I'm 100% stumped on this one.. I checked all my wiring, tach was connected behind the guage cluster as per techsoft.. maybe I opened another wire on accident.. but no, it was perfectly fine..

All my connections are soldered and taped with 33+, no loose connections grounding out anywhere... it was a clean install I dont get whats going on..

Back to Top

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: April 04, 2004 at 5:16 PM / IP Logged

has the customer added anything to his car snice the install such as a tach or dash lights?

i would go back and triple check the wires again.

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Back to Top

proinstall

Copper - Posts: 77

Joined: January 07, 2004

Location: United States

Posted: April 04, 2004 at 6:19 PM / IP Logged

No.. nothing was added..

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

00’ Maxima problems.. help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.