Hyundai Elantra 2002 Australia

Hi,

I have checked the other posts and am confused as to how to connect the keyless door locks to my alarm.

There is 2 black wires from the alarm with negitive pulse ..unlock and lock...by reading other post i found the control unit behind ashtray in middle of dash.

My problem is..... do I just find the wires at this module..... and join with the 2 wires from the alarm on to each colour (unlock /lock).

Also will the colour code for the Elantra be the same for Australia as in the USA model?

I have been baking in the hot sun for a week trying to sort out theses 2 wires, please help.

Thank you

Tony

blk/org or blue *1  |F  |white 22 pin plug in DKP

http://www.velocitymotorsport.com/images/install_notes/148.jpg

Use the above information to wire into the Elantra's type-F one wire system.

Thank you Jeff for the information.....will give it a go...fingers X

Tony

Hi again,

the blue wire has +12 volts and the ORANGE / blck 0 volts

i think this central locking on the elantra is a two wire system  (negitive???) it has a rod from the keylock  which triggers the door locks...

the alarm i am using is a RHINO  model (RA) made in oz

the instructions say to use 2 relays it vehicle is positive pulse power lock system........ or none if negitive pulse system...

all the wiring is black and  is so hard to keep track of the wires.

this is sooo confusing.....please need more help

thanks

Tony