Negative armed output

Home / the12volt's Install Bay / Car Security and Convenience / Negative armed output (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bpm687

Member - Posts: 26

Joined: March 25, 2004

Location: United States

Posted: April 12, 2004 at 1:46 AM / IP Logged

Does anyone know what to do with this wire. Its organe coming from the alarm brain and its orange and it says -NEG armed output Starter disable. Now what do I do with it do I just ground it or what?

Back to Top

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: April 12, 2004 at 1:53 AM / IP Logged

Hook it up to trigger a starter kill relay.

Back to Top

bpm687

Member - Posts: 26

Joined: March 25, 2004

Location: United States

Posted: April 12, 2004 at 1:55 AM / IP Logged

Do I have to can I just use it for my window roll up module?

Back to Top

bpm687

Member - Posts: 26

Joined: March 25, 2004

Location: United States

Posted: April 12, 2004 at 1:59 AM / IP Logged

And If I do use the starter kill do I have to make a relay like this and if so what does it mean by starter wire starter side and such

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: April 12, 2004 at 10:11 AM / IP Logged

you would cut the starter wire into two and one side will come from the key and one will come from teh starter.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: April 12, 2004 at 12:47 PM / IP Logged

Also, pin 86 is wrong. It should be 12 volt ignition. You actually can use a constant to wire it up, but in the past I've found that this causes dead batteries. Its much more reliable to wire it to an ignition wire, but make sure its an ignition wire that is hot during engine cranking also, or the relay wont work right.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Negative armed output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.