problem with 520T and Avital 2200

Home / the12volt's Install Bay / Car Security and Convenience / problem with 520T and Avital 2200 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dlee337

Member - Posts: 9

Joined: March 14, 2004

Location: United States

Posted: May 05, 2004 at 8:41 PM / IP Logged

vehicle is a 90 Acura Integra.

i am trying to program the 2200 to not chirp when arming and to passively arm itself. the procedure requires that the green or violet wires be connected (as well as the yellow). i did not connect the violet wire to anything. the blue trigger wire is connected to my hood mercury switch and doors. those work fine. the green wire is connected to the BUB module.

i am getting power through the BUB module, but i can not enter the feature programming mode (i am guessing because the alarm thinks the green wire is not connected to anything, but it is connected to the BUB).

through some searching i found that the BUB needs to charge before use. could the fact that the BUB is not charged keep the alarm from recognizing the BUB module and prevent me from entering the feature programming mode?

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: May 06, 2004 at 3:44 PM / IP Logged

it's asking to see a door open, which wire did you use to tap into the door circuit? you dont need to use both + and - , just whichever you are using to monitor the doors in the vehicle....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

dlee337

Member - Posts: 9

Joined: March 14, 2004

Location: United States

Posted: May 07, 2004 at 1:23 PM / IP Logged

right, my blue wire from the alarm goes to my doors. the alarm goes off when any of the dorrs or hood is opened, so i know it 'sees' the doors. i am doing this with the door open, BTW...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

problem with 520T and Avital 2200

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.