the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 malibu,factory keyless entry,al 100 alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
cem3 
Member - Posts: 1
Member spacespace
Joined: September 01, 2002
Location: United States
Posted: September 01, 2002 at 3:25 PM / IP Logged  
need help with installation of al 100 into existing factory keyless entry system. not finding the right places to make wire connections. has anyone done one of these before and are red and yellow made at key switch area or at fuse panel? removed under side of dash and didnt see easy access to wiring. i dont want to butcher anything and want to make a good clean installation. any help would be appreaciated.
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: September 01, 2002 at 11:01 PM / IP Logged  

I'm having trouble understanding what you're trying to ask.

If you're trying to ask "How do I access the main ignition wires?", the answer is that you remove the radio and reach in that way. 

But I'm pretty sure that you can also find them in the main harness leading from the driver's underdash out into the engine compartment.  At least that's where I got them when I did a Grand Am, which is the same car as a Malibu. 

(Not that it matters to you, but the green second ignition wire wasn't available under the dash...but that's only needed if you're doing remote start.)


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer