1st time install question

Home / the12volt's Install Bay / Car Security and Convenience / 1st time install question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

xoutlawz00x

Member - Posts: 28

Joined: January 24, 2004

Posted: May 20, 2004 at 11:05 PM / IP Logged

Do i need to solder or use any thing specail like diodes to install an alarm or can i just make the connection and tape it real good to make sure it doesn't move

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 20, 2004 at 11:25 PM / IP Logged

Always use solder for your connections and depending on the vehicle, you may need relays, diodes and resistors. If this is for the 1997 Civic, then there is nothing special that is needed for the installation of the alarm system.

* Also, I didn't find any pics on my computer in regards to the actuator pictures for the Civic, sorry 1st time install question -- posted image.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: May 20, 2004 at 11:26 PM / IP Logged

what type of car?

the way that i make the connection is to slice the objective wire and split the strands in half, then stick the wire to it, then wrap the wire around it, and then tape it.

i have some pic of the actuator for 92-95 civic somewhere, i have to find it

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

xoutlawz00x

Member - Posts: 28

Joined: January 24, 2004

Posted: May 21, 2004 at 9:15 AM / IP Logged

thanks

xoutlawz00x

Member - Posts: 28

Joined: January 24, 2004

Posted: May 22, 2004 at 9:46 PM / IP Logged

yea its for a 1997 civic hatchabck no factory alram

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1st time install question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.