Clifford Intelligard 200

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Intelligard 200 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Mousehouse

Member - Posts: 1

Joined: June 03, 2004

Location: United States

Posted: June 05, 2004 at 12:43 PM / IP Logged

I have one of these alarms in my car as well as a microwave sensor. I am looking for a set of wiring diagrams for the clifford 200. Does anyone know where I can find them?

When I originally had the microwave sensor installed in another car on this same alarm system it was setup to chirp the alarm and not set it off. Since I changed cars and had the alarm installed when the microwave sensor is on it sets the alarm off all of the time. How can I wire it to make it chirp the alarm only?

Thanks in advance for any help.

sincere0219

Member - Posts: 10

Joined: May 26, 2004

Location: United States

Posted: June 05, 2004 at 12:45 PM / IP Logged

Maybe its just set to sensitive for the new vehicle. Try turning it down some and see if it works. Then again I am not a expert

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford Intelligard 200

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.