Matrix 3.5 questions

Home / the12volt's Install Bay / Car Security and Convenience / Matrix 3.5 questions (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

chaley16

Member - Posts: 1

Joined: June 15, 2004

Location: United States

Posted: June 17, 2004 at 8:14 AM / IP Logged

I tried to splice my factory security LED to the 3.5 LED and the clifford works but the factory light doesnt. Can you only run one LED off the Clifford? Also I was reading that it is possible to change the alarm sound, how is it done? Thanks

Back to Top

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: June 17, 2004 at 11:39 AM / IP Logged

you can run more that one LED, but i think its best to use all aftermarket ones.

as far as the siren sounds, you cant really "change" them, but you can eliminate ones. dissamble the siren and pull it open. there will be 6 metal tracers labeled one to six. simply cut a loop to delete that sound. the siren will still sound the full amount of time, it will play the remaining sounds and repeat for the full duration.

MECP certified installer

Back to Top

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: June 17, 2004 at 7:07 PM / IP Logged

You can run any LED just make sure you have the correct voltage on that LED. Some are 2 and some are 4. So just check and make sure you have the right voltage, and use a resistor accordingly.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Matrix 3.5 questions

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.