Clifford RSX 3.5 w/ DEI 530T Maufuction?

Home / the12volt's Install Bay / Car Security and Convenience / Clifford RSX 3.5 w/ DEI 530T Maufuction? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Koontek

Member - Posts: 3

Joined: July 06, 2004

Posted: July 06, 2004 at 4:49 AM / IP Logged

Hey Guys

I have a 98 Honda Accord V-6 with a Clifford RSX 3.5. Well last night I was hooking up my DEI 530 T Window Automation System and everything seems to work fine except my passenger window. Both windows roll up when arm, vent and roll down with the alarm fine. But when i try using the switches the passenger side window doesnt work correctly. It closes the window about 1-2 inches then stops when you try to roll it up or down from both switches. The drivers side works fine. I dont get it. I tried searching for this topic but could not fine my exact answer. Thanks for all the help guys!

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: July 06, 2004 at 11:10 PM / IP Logged

Have you adjusted the sensitivity dipswitches on the 530T? Where did you get the main power wire for the 530T? Where did you ground it? Did you connect the wires for the passenger window in the passenger door?

Back to Top

Koontek

Member - Posts: 3

Joined: July 06, 2004

Posted: July 07, 2004 at 12:22 AM / IP Logged

Hey Jworm,

Thanks for replying to my post. No i did not adjust the dipswitches on the unit itself cause i figure it was fine since it rolls the window up and down fine when used with the alarm. I got the main power wire from the fuse box (its also connected to my alarm brain), and yes i did run the wires all the way to the passenger door for the switch and motor. Do i need to ground it in my door? Its just weird how when i try to roll my window down or up it just just vents up untill its close. Let me know your thoughts on this. Thanks!

Back to Top

Koontek

Member - Posts: 3

Joined: July 06, 2004

Posted: July 10, 2004 at 7:46 PM / IP Logged

Well, i just tried playing with the dip switches and no luck. I have no idea whats going on with it. I also tried another brain unit and it did the same thing. Any ideas guys ?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford RSX 3.5 w/ DEI 530T Maufuction?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.