Window wiring help

Home / the12volt's Install Bay / Car Security and Convenience / Window wiring help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nolimit

Member - Posts: 1

Joined: July 09, 2004

Location: United States

Posted: July 09, 2004 at 12:41 PM / IP Logged

I own a 2003 mitsubishi galant with a prestige aps 995c installed and remote start. I want to wire the module to allow my windows to roll up/down while car is turned off. Does anyone have an idea of how to do this. My instructions do not show me how to do this so help would be appreciated.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: July 09, 2004 at 12:56 PM / IP Logged

you can have the unit(window module) be active when you arm ur alarm. that wire from the alarm is called "ground when armed"- orange on primary harness(20pin).

that will get you started.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

TheBayArea

Member - Posts: 26

Joined: July 04, 2004

Location: United States

Posted: July 10, 2004 at 4:03 AM / IP Logged

what window module do you have? if you dont have one, go get the 530T by dei, then come back. the 530t will allow you to roll your windows both up and down. 529t will let you roll your windows in 1 direction, so make sure you get the 530T

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Window wiring help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.