the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start 91 s-10


Post ReplyPost New Topic
< Prev Topic Next Topic >
heschlie 
Member - Posts: 24
Member spacespace
Joined: March 06, 2004
Posted: July 09, 2004 at 9:51 PM / IP Logged  
hey ok i got all the wiring done to what i believe is supposed to be, but when i press the button to remote start it lights up the dash, and the fuel pump goes on but it doesnt crank. i have a panther ps-5000 and it has the remote start built in, i cant find, or know if there is a neutral safety wire on the alarm, and when i test the voltage coming out of the brain for the starter wire it doesnt change, whats going wrong?
heschlie 
Member - Posts: 24
Member spacespace
Joined: March 06, 2004
Posted: July 10, 2004 at 12:18 AM / IP Logged  
ok great now im lost, i just went to plug my brain back up and try again and now it blinks but it wont transmit to the remote! is it pretty much not worth installing at this point? or should i try to get a replacment?
Javelin3o4 
Copper - Posts: 239
Copper spacespace
Joined: August 22, 2003
Location: United States
Posted: July 10, 2004 at 4:03 AM / IP Logged  

most alarms require a neutral safety switch wire be hooked up in order for it to remote start, that wire usually needs to see ground in order for the remote start to work, also some require a hood pin hooked up that way if the hood is popped while the car is remote started the alarm will shut off. Did you cut your starter wire to install a started disable? if you did you connect the wires to the right side? some will say cut the starter wire then connect this color wire of the relay to the key side of the starter wire, then connect the other wire to the starter side of the wire.

heschlie 
Member - Posts: 24
Member spacespace
Joined: March 06, 2004
Posted: July 11, 2004 at 5:05 AM / IP Logged  
thanks for the info, but my problem was that this alarm didnt have that sensor, could it be the handbrake/turbo or something rather to that effect? well anywho the alarm is toast and im not quite sure why at the point, it wont transmit and the antenna is hot, i checked and it looks like a capacitor on the antenna went bad, i dunno i think im gonna get a better alarm system. thanks again for the info.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 9, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer