Installing actuator in Sliding door?

Home / the12volt's Install Bay / Car Security and Convenience / Installing actuator in Sliding door? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: July 10, 2004 at 7:24 AM / IP Logged

Has anyone ever installed an after market door lock actuator in a sliding door of a van. I was going to attempt this in a 2000 Caravan and was looking for any ideas. I assume I will need to figure out how to use the factory wires that were likely installed even though no power locks were installed. ANy ideas are welcome.

J Rilla

Owner/Installer

Back to Top

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: July 10, 2004 at 9:31 AM / IP Logged

I have, I have. Usually these aren't pre-wired. What you should do is go to the dealership and get the factory contacts for the door, it is the easiest way. Then next is something like this( I saw these for like 12 bucks at some website while lookind for the link, just scroll down to van contacts. Everything else is cake.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

jrilla

Gold - Posts: 1,498

Joined: November 19, 2002

Location: North Dakota, United States

Posted: July 10, 2004 at 10:32 AM / IP Logged

Thanks Aeux

J Rilla

Owner/Installer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Installing actuator in Sliding door?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.