Dodge Power Distribution Center (PDC)

Home / the12volt's Install Bay / Car Security and Convenience / Dodge Power Distribution Center (PDC) (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ectwo

Member - Posts: 2

Joined: July 21, 2004

Location: Canada

Posted: July 21, 2004 at 8:25 PM / IP Logged

Hi,

I'm looking wire in my Viper 790Xv into my 2001 Dakota 4x4. I want to wire all the fuses (5 of them) into the factory power distribution center(PDC) under the hood and the interior junction box.

The junction box isn't a problem, the PDC under the hood is, the power side pinch terminals that bite the fuse blades are all there, but the blade"pinch-terminals" for the protected side of the wire isn't. Can you buy the ferrules that attach to the protected side of the fuse, or should I be looking in the scrap yard to butcher a wiring harness?

ectwo

Member - Posts: 2

Joined: July 21, 2004

Location: Canada

Posted: July 21, 2004 at 11:21 PM / IP Logged

BTW,

I have the mini ATO fuses if that helps...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Dodge Power Distribution Center (PDC)

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.