Alarm/Remote RSA924 problem

Home / the12volt's Install Bay / Car Security and Convenience / Alarm/Remote RSA924 problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mereo

Member - Posts: 3

Joined: July 18, 2004

Location: Norway

Posted: July 21, 2004 at 7:13 PM / IP Logged

Just installed my new Alarm/remote RSA924 http://www.12voltdirect.com/product.aspx?prodid=RSA924 after som trouble https://www.the12volt.com/installbay/forum_posts.asp?tid=35781&PN=1 . My problem now is that when I connect the alarm/remote for the first time it's just making a rapid chirping sound. In the manual it says that it should go into alarm mode the first time you connect the alarm/remote. The chirping sound stops when I turn on the igition. And the lights on the antenna seams not to work, still havn't seen any light from them anyway. What could the problem be?

dc-auto

Member - Posts: 14

Joined: July 21, 2004

Location: United States

Posted: July 22, 2004 at 12:03 AM / IP Logged

when the alarm is going off, use your transmitter to disarm the alarm. Then proceed with what ever you need to do at that point.

dc-auto

Remember it's just Ohms Law

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm/Remote RSA924 problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.