1995 Ford Explorer Factory Alarm

Home / the12volt's Install Bay / Car Security and Convenience / 1995 Ford Explorer Factory Alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Andrews2186

Member - Posts: 7

Joined: May 21, 2004

Location: United States

Posted: August 03, 2004 at 6:31 PM / IP Logged

Does anyone have the factory alarm wiring diagram?? I wanna hook my factory alarm up with my autopage i just installed

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 03, 2004 at 10:06 PM / IP Logged

OEM Alarm Arm N/A

OEM Alarm Disarm D GREEN/ PURPLE (-) IN ROUND 55 PIN CONN IN DRIVER KICK

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

spokman

Copper - Posts: 75

Joined: June 19, 2004

Location: United States

Posted: August 05, 2004 at 12:56 AM / IP Logged

What do you want to know? I"m pretty good with that year. : ) Finishing up an alarm install in my 95 Explorer Limited. You can buy a factory manual on CD online from Ebay. There is also a guy selling them to but I can't remember the link. Can't really send you the diagram you want either. The screen capture part of it scrambles it like that guy in that movie TimeLine.

Back to Top

Andrews2186

Member - Posts: 7

Joined: May 21, 2004

Location: United States

Posted: August 10, 2004 at 11:47 AM / IP Logged

If i hookup my autopage wire to that factory disarm will that do everything that my factory does? i mean will that unlock my doors and lock them???

Back to Top

spokman

Copper - Posts: 75

Joined: June 19, 2004

Location: United States

Posted: August 10, 2004 at 7:11 PM / IP Logged

The factory disarm wire will only disarm the factory alarm. Nothing less, nothing more. What I did was use the - open with two diodes to open the door locks and disarm the factory. The door unlock wire is Pink/Green. The lock wire is Pink / YELLOW. Both need to be shown a negative as well as the factory disarm. Point the stripe on the diode towards the alarm. If you have a factory disarm wire disregard the diode setup. Let me know if this helps.

Back to Top

spokman

Copper - Posts: 75

Joined: June 19, 2004

Location: United States

Posted: August 10, 2004 at 7:12 PM / IP Logged

The factory disarm wire will only disarm the factory alarm. Nothing less, nothing more. What I did was use the - open with two diodes to open the door locks and disarm the factory. The door unlock wire is Pink/Green. The lock wire is Pink / YELLOW. Both need to be shown a negative as well as the factory disarm. Point the stripe on the diode towards the alarm. If you have a factory disarm wire disregard the diode setup. Let me know if this helps.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1995 Ford Explorer Factory Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.