Matrix RS 3.5 451m needed?

Home / the12volt's Install Bay / Car Security and Convenience / Matrix RS 3.5 451m needed? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sesmith

Member - Posts: 3

Joined: July 21, 2004

Posted: August 07, 2004 at 1:25 AM / IP Logged

I'm installing an RS 3.5 in a '95 Toyota Supra. The 3.5 came with a 451m relay. My car has (-) door locks so I didn't think a relay was needed. Can I just cut the 3 wire harness off of the 451m and wire it directly to the door lock/unlock wires? The install manual doesn't cover this.

Javelin3o4

Copper - Posts: 239

Joined: August 22, 2003

Location: United States

Posted: August 07, 2004 at 1:30 AM / IP Logged

if you dont require the relay just cut the small plug off the relay with the green,red,blue wires.

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: August 07, 2004 at 2:14 AM / IP Logged

yea, just dont use the red for anything. its not strong enough of 12v unless its going to 86 of another relay.

MECP certified installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Matrix RS 3.5 451m needed?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.