Alarm won't shut off

Home / the12volt's Install Bay / Car Security and Convenience / Alarm won't shut off (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Kobaltic

Member - Posts: 36

Joined: June 25, 2003

Location: United States

Posted: August 15, 2004 at 3:12 PM / IP Logged

I got a used viper 350hv. I hooked it up and the alarm started blaring. I don't have the original remote to even try and shut it off. I can't program the new remote while the siren is active. I think the alarm was going off when the battery got disconnected and the rapid resume logic is causing it to stay on. Is there a way to reset the rapid resume logic back to off? Could it be anything else? Any help would be great. Thanks.

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 15, 2004 at 4:15 PM / IP Logged

most alarms will go into trigger mode when you apply power to them.....i dont know what the steps are for DEI but, you should be able to use the valet button and override the system...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: August 15, 2004 at 4:45 PM / IP Logged

make sure yellow wire on primary harness is plug to a ignition. and power up all the necessary wire for the alarm and plug in the valet button. then w/ a key, turn to ign and press the valet button once and wait for 1-2 sec and the siren should cut off.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: August 16, 2004 at 10:08 AM / IP Logged

Here is a copy of the install and owners manuals for that alarm: http://www.directechs.com/guides/manuals/ig/viper/N426V_07-04.pdf

http://www.directechs.com/guides/manuals/og/viper/G426V_07-04.pdf

Do it right the first time

Back to Top

Kobaltic

Member - Posts: 36

Joined: June 25, 2003

Location: United States

Posted: August 21, 2004 at 12:03 PM / IP Logged

Just wanted to say thanks. I got it working.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm won't shut off

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.