Brighter LED

Home / the12volt's Install Bay / Car Security and Convenience / Brighter LED (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

robb420in323

Copper - Posts: 101

Joined: July 13, 2004

Location: Ontario, Canada

Posted: August 25, 2004 at 7:00 PM / IP Logged

I noticed that my alarm has a soft red light at night when looking thru the tints.

I also noticed that my old lighters will LED's in them still worked and also are bright.

Does anyone know if this would match up? Even if I could run a few in series to use

the supplied power without blowing a single one..?

Hunter S. Thompson for sheriff

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: August 25, 2004 at 9:21 PM / IP Logged

You can add in the lighter LED's if you wish to the existing alarm system.

It would be helpful to know the working voltage, and current consumption for a more accurate resistor value, if one is needed.

But those lighter LED's dont consume very much current to start with.

Regards

EVIL Teken . . .

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Brighter LED

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.