Clifford installer in San Antonio

Home / the12volt's Install Bay / Car Security and Convenience / Clifford installer in San Antonio (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

smith2004

Member - Posts: 2

Joined: August 25, 2004

Location: United States

Posted: August 25, 2004 at 4:39 PM / IP Logged

Good afternoon gentlemen

I am looking for an experienced Clifford installer to install TWO alarms only in my personal vehicles. Located in San Antonio, TX.

Both are Clifford Intelliguard 850. No remote start or pager, but they have shock sensor and proximity sensor. I also have a Piezo siren, battery back up, glass break sensor, and a trunk solenoid to be added to one of the vehicles that does not have a factory trunk release. All parts brand new.

The cars are a 2002 Sequoia (trunk release to be added) and a 2002 Maxima (factory trunk release).

Please e-mail me and let me know how much you would charge for each. If you have "done a few", "your own" or don't have fairly extensive experience, then please don't contact me. I would like for the wires to be soldered and covered with heatshrink. I will supply all parts and materials, you supply labor and tools. I can help, or you can do it on your own. I prefer that you come to my house to do the install, but if you own a legitimate install shop I can bring it to you. Strongly prefer MECP certified installer. Reputable local shops have quoted $250 to $350 for each one, so I am looking to save some money. Please e-mail me at centexbnkr|at|lycos.com

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: August 26, 2004 at 9:06 AM / IP Logged

Did you try any of the Best Buys? They carry and install Clifford and DEI alarms

Do it right the first time

smith2004

Member - Posts: 2

Joined: August 25, 2004

Location: United States

Posted: August 26, 2004 at 6:40 PM / IP Logged

Ray -

I responded to the e-mail you sent. Let me know.....

Shannon

jseg04

Member - Posts: 1

Joined: August 19, 2004

Location: United States

Posted: September 06, 2004 at 4:14 AM / IP Logged

Try Jand Y electronics on Zarzamora on the southside I used to work with them and they are some pretty sharp guys. Tell them Jimbo from La. sent you. Some of the guys will work on the side at their housei

anything is possible!!!!!!!

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: September 07, 2004 at 8:49 AM / IP Logged

Avoid J & Y at all costs, I've fixed too many of their hack jobs. Come by and see me, we will talk in person.

Do it right the first time

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford installer in San Antonio

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.