1st time installing an alarm
Home /
the12volt's Install Bay /
Car Security and Convenience / 1st time installing an alarm (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: September 02, 2004 at 1:20 AM / IP Logged
1.jpg)
This is my first time posting, and installing an alarm. I just need some help on wiring. The first pic is the wiring diagram for the alarm, the second is the window roll up switch, and the third is the proximity sensor. I need to know what wire i should hook the window and prox to on the alarm. Also if i need xtra relays and such. Thanks in advance,
Eric
window switch
proximity sensor
It says pink wire to accessory and orange wire to 500ma activation. What wires would i hook to on the alarm?
Posted: September 02, 2004 at 9:08 AM / IP Logged
Posted: September 02, 2004 at 12:19 PM / IP Logged
Posted: September 02, 2004 at 1:50 PM / IP Logged
Posted: September 02, 2004 at 2:49 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
