dead plainview clifford valet switch?

Home / the12volt's Install Bay / Car Security and Convenience / dead plainview clifford valet switch? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tastyratz

Member - Posts: 9

Joined: August 29, 2004

Location: United States

Posted: September 14, 2004 at 10:39 PM / IP Logged

ok so When attempting to spend some more time programming my avantguarde g4 on my nissan 240sx i noticed that my plainview valet switch buttons arent doing anything! good thing i dont have blackjax turned on... they worked as far as i know the whole time ive had the alarm and i thought they have always worked fine until today since ive used them before. troubleshooting says "Verify the WHITE wire rests at +5V, shows +3V when pressing the switch’s * button and 0V when pressing the blank button" so when I hooked up a multimeter i got 0v at rest and .07v when pressing the * button and 0v when pressing the blank button... ground wire looked ok and I checked the connections on this + the actual multimeter connection and everything is fine. the only change ive made is soldering in the tach wire which i doubt would cause any of this.

button.

Back to Top

its_radio_shop

Copper - Posts: 76

Joined: March 16, 2004

Location: United States

Posted: September 15, 2004 at 9:54 AM / IP Logged

The easiest thing to do if you have a Clifford dealer near you, is to go in and see if they will hook your alarm up to a PC and see what functions are working. If it shows your valet is the only thing not working they should have a spare you could plug into to see if that fixes it. I have run a AG4 for several years and have installed several too. Its not unheard of for those valet switches to have a problem, although its not real common. Let me know what you find out. Good luck.

Back to Top

Search for other posts by its_radio_shop

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dead plainview clifford valet switch?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.