DEI Bitwriter Data Port Question

Home / the12volt's Install Bay / Car Security and Convenience / DEI Bitwriter Data Port Question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jmr964

Copper - Posts: 70

Joined: September 02, 2004

Location: United States

Posted: September 17, 2004 at 10:19 AM / IP Logged

Can mulitple accessories be hooked up through the data port on a DEI alarm/remote start. For instance having a 820M module and say a 103T module (this is just for example). I am curious if anyone has done anything like this? If you have, did you splice the two units together or did you have to diode isolate them and did it even work ??

Jason

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: September 17, 2004 at 11:31 AM / IP Logged

as far as i know the Bitwriter port can only be used for the Bitwrier, unless you are using this ESP2 port to interface with their video products.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI Bitwriter Data Port Question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.