VIper 791 remote start program help

Home / the12volt's Install Bay / Car Security and Convenience / VIper 791 remote start program help (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jeep thang

Member - Posts: 11

Joined: September 18, 2004

Posted: September 18, 2004 at 1:46 AM / IP Logged

Hello, New to forum, Need ass-istance........

my problem.... I cant seem to fiqure out how to program the remote start correctly...

I have all wiring done correctly for the remote start, so this is a programming problem

When i hit the remote start button on the lcd pad,, nothing happens..

can someone walk me through a easy way to program the remote start?

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: September 18, 2004 at 2:53 AM / IP Logged

open any door turn key and off press and hold valet swith in still you 3 beep and press on valet 2 time and hold and you hear 2 beep and press unlock button on remote you will hear 2 beep now you done turn on and off again

jeep thang

Member - Posts: 11

Joined: September 18, 2004

Posted: September 18, 2004 at 10:57 AM / IP Logged

Yes thank you,,, Now when i hit the remote start button, it will make some clicks in the viper remote start and the tach will come on,,, but it doesnt start to crank over or anything.... did i program wrong?

jeep thang

Member - Posts: 11

Joined: September 18, 2004

Posted: September 18, 2004 at 11:12 AM / IP Logged

Now i can get it to start,, but it shuts off immidiently after it starts....what should i check?

jeep thang

Member - Posts: 11

Joined: September 18, 2004

Posted: September 18, 2004 at 11:41 AM / IP Logged

Okay ,,, getting farther and farther on it now,,,, If i have the key in the ignition on acc.... and hit the start button, it starts,, but then the starter grinds out... i have a green wire comming from the viper alarm that isnt going to anything, and its supposed to goto the Key side ignition wire on my jeep wrangler...... i cant find the color of that wire :(... some one help please

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: September 18, 2004 at 2:10 PM / IP Logged

first try to learn the tach again, if it still does it try using another tach source.

what year model?

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

jeep thang

Member - Posts: 11

Joined: September 18, 2004

Posted: September 18, 2004 at 3:07 PM / IP Logged

1997 jeep wrangler... sahara edition

I tried fallowing the persons directions up top to learn the tach and it didnt work

It will start for 1 second then shut off, so i assume its something with the tach and voltage correct???

jeep thang

Member - Posts: 11

Joined: September 18, 2004

Posted: September 18, 2004 at 6:59 PM / IP Logged

I found a good tach source,, but now when i start, it runs for 10 seconds,, then shuts off... i read in back of manual try to do a low voltage start??? how do i do that? what can i do if it only runs for 10 seconds?

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: September 19, 2004 at 2:39 AM / IP Logged

ok let try this use tach less

open any door turn key and off press and hold valet swith in still you 3 beep and press on valet 2 time and hold and you hear 2 beep and press unlock button on remote you will hear 2 beep then press 3 time on valet swith and one more and hold it press unlock button one time you hear 2 beep press one more time you hear 3 beep now turn key on and off you done

i hope this work for you at the mean time check 2 green fuses on the big wire harness

peanut36274

Member - Posts: 4

Joined: September 23, 2004

Location: United States

Posted: September 29, 2004 at 11:40 PM / IP Logged

I have a 2003 Jeep wrangler and it does the same thing. It start and then shuts off. Where is the tach wire because I couldn't find one on mine. couldn't find the coils

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.