automate am1 427A installation guide

Home / the12volt's Install Bay / Car Security and Convenience / automate am1 427A installation guide (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

osbaldo

Member - Posts: 2

Joined: September 28, 2004

Location: United States

Posted: September 28, 2004 at 8:35 AM / IP Logged

Hi. I need a link or installation instructions to an Automate model AM1 or 427A. Alarm store hooked it up but alarm does not work properly.They are not being very cooperative on fixing the problem. It is probably not wired correctly. its an alarm add-on to the factory keyless system.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: September 28, 2004 at 12:11 PM / IP Logged

http://www.directechs.com/guides/manuals/ig/automate/N427A_12-03.pdf

Regards

EVIL Teken . . .

osbaldo

Member - Posts: 2

Joined: September 28, 2004

Location: United States

Posted: September 28, 2004 at 12:45 PM / IP Logged

thanks Teken

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: September 28, 2004 at 3:18 PM / IP Logged

Please take your time to fully understand how everything will interface with your vehicle. No matter what you do, please varify each potential contact point with your DMM, and follow the reference material as how to do so.

WOOD CUTTER: Measure twice, cut once.

Regards

EVIL Teken . . .

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

automate am1 427A installation guide

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.