2000 Monte Carlo OEM disarm- HELP!

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Monte Carlo OEM disarm- HELP! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

MrFleming007

Member - Posts: 10

Joined: February 20, 2003

Location: United States

Posted: September 28, 2004 at 11:54 PM / IP Logged

Hey guys- heres what I've got. My wifes car is a 200 Monte Carlo. The alarm install is pretty straightforeward, but I have one question that I'd like to get some help with. She has a habit of hitting the lock button on the door when she is getting out of hte car, and then locking it again via remote. I'm pretty sure with the alarm installed this will create an issue of the factory alarm going off when she tries to get back in without using the factory transmitter (hope this makes sense). What kind of a pulse am I going to have to make the alarm send to the factory disarm wire to disarm the factory alarm?

Also, while I'm at it, on this one wire lock/ unlock system, how to I accomplish sequential dorr locks? Thanks in advance for your help!

-Owen

hagmanti

Silver - Posts: 304

Joined: September 14, 2004

Location: United States

Posted: September 29, 2004 at 12:34 AM / IP Logged

From 2000 Chevrolet Monte Carlo Alarm Information

Factory Disarm | Light Green | Fuse Panel or BCM

hagmanti

Silver - Posts: 304

Joined: September 14, 2004

Location: United States

Posted: September 29, 2004 at 12:36 AM / IP Logged

Sequential door locks-- unlock wire goes into driver's door to run relays that run motors. 2nd unlock wire runs entire unlock system....

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Monte Carlo OEM disarm- HELP!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.