Crank time on Phonix Digital PD-175

Home / the12volt's Install Bay / Car Security and Convenience / Crank time on Phonix Digital PD-175 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

a-better

Member - Posts: 7

Joined: August 06, 2003

Location: United States

Posted: October 05, 2004 at 9:38 AM / IP Logged

I have installed a PD-175 on a 98 Jimmy using both the alt. filed wire and the oil sensor wire as + inputs (neither show a full 12 volts getting 9 af most) and still get cranktime of 1/2 second too long. Is there a way to fix this or should I yank it and install a tach signal remote start. The customer loves the remotes with the PD-175 or I would have swapped already. Any help?

a-better tint & alarm

jkyliej

Copper - Posts: 101

Joined: September 28, 2004

Location: United States

Posted: October 05, 2004 at 1:37 PM / IP Logged

Is there a section in the programming that allows you to set the starter duration time?

jkj

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Crank time on Phonix Digital PD-175

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.