C3000 computstar wiring relay

I am a newbie trying to install this compustar 900 2way to my 97 accord, I have a problem with the 2 relay on the primary harness, 1 of the relay have a yellow wire and a yellow black wire, where do I connect these to?   and the other relay have a purple wire and a blue wire.  Also, I need to find the tach sensing wire, I think it's at the distributor, but i don't know where the distributor at, thanks for the help.

1)the relay with the two yellow wires are for a starter kill, cut ur start wires on ur accord (blk/wht) and connect the yellow to the starter side and the yellow/blk to the key side. 2) the second relay w/ the thick blue and the thin purple is for a second IGN/ACC etc. in ur case u don't need it. 3) as for the tach it is at distributor, its blue wire in a two pin connector, i think the other is a tan ( if i remmember correctly)