1998 Mountaineer Power Door Lock

Home / the12volt's Install Bay / Car Security and Convenience / 1998 Mountaineer Power Door Lock (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kevincrowley

Member - Posts: 1

Joined: October 19, 2004

Location: United States

Posted: October 19, 2004 at 9:39 PM / IP Logged

The drivers door power lock (factory) stopped working recently. Since all the other door locks work properly both with the remote and drivers door switch I assumed the actuator had gone bad. I replaced the actuator and also a switch on the door latch but the problem still persists. I do not see any other obvious problems (e.g.; rusted connectors, split wires)

Would appreciate any suggestions on what could be causing this problem and any trouble shooting tips.

Thanks in advanced for any tips/advice.

Kevin Crowley

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 19, 2004 at 9:44 PM / IP Logged

Did U meter the Door Lock wires going to actuator?

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1998 Mountaineer Power Door Lock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.