2002 Corolla Remote starter

Hi,

I recently purchased ProStart Remote starter CT-3100. Was able to do most of the installation successfully in my 2002 Corolla. The door lock/ unlock just fine. But when I press the second button to start the car, it cranks the starter but the engine does not start. Any clue what could have gone wrong? I have tried reseting to factory default, tried Auto Tach programming.

Thanks in advance for your efforts.

Riyaz

Yes I did get confirmation like the manual mentioned. The parking light went off once and came back on. I went ahead to save the settings. I then tried the remote start. It cranks for over a minute but the engine does not fire.

I was able to download wiring connection for corolla 2002 from Prostart( www.AutoStart.ca/Prostart)

here is the link:

http://206.47.191.115/pageweb.nsf/C211375925D8B09985256C2100588022/C4E2FD1B48BD7F4585256F3800559354?opendocument

here it indicates that the Tach wire can be connected to Black wire in diagnostic connector

I have tried that with no luck.

I will try connecting to injector #1 wire as you mentioned.

Thanks

Hi,

I tried connecting to the yellow wire on injector #1 and re-learn tach. The programming completed successfully. However, I am still facing the same problem. Engine cranks for about a minute and does not fire.

What else could be the cause?

Thanks