the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

has anyone ever dealt with command start


Post ReplyPost New Topic
< Prev Topic Next Topic >
Sexified 
Copper - Posts: 87
Copper spacespace
Joined: October 17, 2004
Location: Canada
Posted: October 24, 2004 at 10:04 AM / IP Logged  
have you delt with the brains burning up the park light trace on the board and/or the start wire trace?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 24, 2004 at 10:16 AM / IP Logged  
I've had a few in the past, but then I installed a fuse on the parking light wire ( PURPLE ). What model number are you haveing troubles with ? I have never liked the CS units personally. They have had many ups and downs with their products as far as quality and reliability.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: October 25, 2004 at 10:00 AM / IP Logged  
There is a jumper on the inside of the module to swtich from negative to positive parking lights. The earlier models used a poor jumper that caused this to occur if used in the positive position. Use a small female spade for a jumper. The newer models use an insualted one similar to what is used for many negative speaker terminals.
sparky
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: October 25, 2004 at 5:41 PM / IP Logged  
i can't count how many recitifiers diodes i replaced in the old 2400 series...... thats one product i would never sell again......
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 25, 2004 at 6:58 PM / IP Logged  

kgerry wrote:
i can't count how many recitifiers diodes i replaced in the old 2400 series...... thats one product i would never sell again......

You tell 'em Kev !! I can't agree with you more. Wish Staub would just ditch their product already !

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
extreme1 
Silver - Posts: 1,070
Silver spacespace
Joined: February 12, 2003
Location: Canada
Posted: October 25, 2004 at 10:06 PM / IP Logged  
Well considering command start went bankrupt years back and the name was bought by automobility.
I've had CS2400/2500's latch the starter relay and burn up starters and batteries.
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
gus1 
Gold - Posts: 1,013
Gold spacespace
Joined: October 15, 2003
Location: Canada
Posted: October 26, 2004 at 11:56 AM / IP Logged  
Awwwww.... c'mon... they weren't that bad. You always knew when a 2400/2500 was on its way out by how often it would go into tach lockout hee hee!. Seriously though, the 290, 270, 260 were quite solid, even the early 300's weren't bad. They were simple, they worked. The later 300 series were when things started to go really bad (starting by them selves with no way to shut them off... remotes that would just up an start transmitting full bore out of the blue, timer modes that didn't exist etc. etc.)
I even remember the 3000 series... those MOSFET curses with the book sized brain......
Gus
Wherever I go, that is where I end up......
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: October 26, 2004 at 12:29 PM / IP Logged  

oh come on... who among us wants to go back to wire tying thermistors to the rad hose??  ha ha

it was my experiences with CS that steered me into becoming a DEI dealer and i couldnt imagine going back......

Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer