hydraulics off alarm...24 volts

Home / the12volt's Install Bay / Car Security and Convenience / hydraulics off alarm...24 volts (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Sexified

Copper - Posts: 87

Joined: October 17, 2004

Location: Canada

Posted: October 29, 2004 at 1:27 AM / IP Logged

if the solonoids i want to trigger need 24 volts how can i safely control them off an alarm with only 12 volt output?

good idea? bad idea?

sweet.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: October 29, 2004 at 1:30 AM / IP Logged

Use a relay or solenoid that requires 12 volts to activate and send the 24 volt signal out from the relay. It will work you just need an extra part, the relay.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hydraulics off alarm...24 volts

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.