Power Wire Question

Home / the12volt's Install Bay / Car Security and Convenience / Power Wire Question (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jonbth

Member - Posts: 42

Joined: June 01, 2004

Location: United States

Posted: November 01, 2004 at 10:40 PM / IP Logged

I'm going to install a Valet 561t remote starter on my Nissan Frontier. The module has 2 12v inputs and I'll need at least 1 and maybe 2 relays. Can I draw all my power from the 12v ignition switch wire? I think that wire is 40amp fused from the battery.

Back to Top

Ben.c

Member - Posts: 29

Joined: October 30, 2004

Location: Australia

Posted: November 01, 2004 at 10:46 PM / IP Logged

You can hook up many relays to the main power supply feeding the ignition switch ( constant 12v+) . The remote start sytems wont draw any more power than your vehicle being started by the the key . Some remote start systems such as DEI use a lot of relays , I have hooked up as many a 10 relays on a sytems with many features with no problem.

ozy installer

Back to Top

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: November 02, 2004 at 8:29 AM / IP Logged

Make sure you fuse each connection.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Power Wire Question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.