power door locks

Home / the12volt's Install Bay / Car Security and Convenience / power door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

SAyeed khan

Member - Posts: 17

Joined: November 04, 2004

Location: Trinidad and Tobago

Posted: November 06, 2004 at 10:18 PM / IP Logged

I tapped into a nissan sentra 2002 keyless entry system but driver side lock was not locking or unlocking . the other 3 doors worked fine . please help me.

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: November 07, 2004 at 11:09 AM / IP Logged

If it works from the Door switch, then you don't have the right wire or you don't have a good ground to wire.

If it doesn't work from door switch..check switch, motor & wires

Don't Learn from Others Mistakes

You Might Be the One That Knows.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 09, 2004 at 10:23 PM / IP Logged

Power Lock GRAY 16 PIN CONNECTOR #201

Power Unlock PURPLE / RED IN DRIVER KICK PANEL

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

power door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.