power door lock/unlock problem

Home / the12volt's Install Bay / Car Security and Convenience / power door lock/unlock problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Lee_Thao

Member - Posts: 16

Joined: November 03, 2004

Location: United States

Posted: November 08, 2004 at 2:28 PM / IP Logged

i have a 96 integra and trying to install a clifford matrix 3.5 alarm. which wires do i use for power door lock and unlock, i can't seem to figure it out. there's a relay wire that plugs into the alarm module, which has 5 wires.

violet/black - lock/unlock
GREEN/ black - lock output
WHITE/ black - lock normally closed
blue/black - unlock output
BROWN / black - unlock normally closed

i'm really confused on which wires connect where and if i don't need to use all these wires. by the way the violet/black wire have a fuse relay on it. can somebody help me ?

Lee

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: November 08, 2004 at 2:32 PM / IP Logged

violet/black - lock/unlock to GROUND

GREEN/ black - lock output to BLACK / White

blue/black - unlock output to BLACK / Red

Others tape off

Power Lock	BLACK/ WHITE	14 PIN GRAY CONNECTOR
Power Unlock	BLACK/ RED	IN DRIVER KICK PANEL

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Lee_Thao

Member - Posts: 16

Joined: November 03, 2004

Location: United States

Posted: November 08, 2004 at 3:22 PM / IP Logged

thanks that helped, it works now.

Lee

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

power door lock/unlock problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.