2002 mitsubishi galant alarm/remote start

I am going to install a Crimestopper RS/alarm into a Galant with keyless entry. I am not sure if it has a factory security system. My question is how do i incorporate the keyless entry from the alarm. Do i just hook up the lock/unlock wires. Are there any disarm wires and how do i hook them up?Also i purchased the pku-MIT bypass, any advice on installing it?

if you vehicle has a grey igition key, then it has a factory alarm, and you will need to diode isolate the lock and unlock wires and hook them up to the arm/disarm wires as well.2005 Toyota Corolla S

    1.8L VVT-i I-4

Always double check your wires with a DMM!!!

Do Not Use A Test Light!!!

MECP Certified Installer!

Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

would i just run another wire from the unlock output from alarm to the disarm wire in car, and the same for arm.Is there a way to bypass the factory alarm alltogether, or do you have to arm and disarm every time enter/exit the vehicle? would there be anything else needed to make the remote start work, since it starts even when the car is armed.