the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 Dodge Ram Door Lock Question


Post ReplyPost New Topic
< Prev Topic Next Topic >
Njnj 
Member - Posts: 7
Member spacespace
Joined: October 10, 2002
Posted: December 01, 2004 at 9:50 PM / IP Logged  
Im going to be doing a alarm/remote start in a 99 Dodge Ram and had some questions about the Door Lock/Unlock...
On here, it says that the Door Lock is a reverse polarity... While on Directtechs.com it shows both the unlock/lock wires as a 5 wire system.... I was to understand these are different wiring diagrams..... I am going to be using a crimestopper Cs2011Rs if that helps, can anyone tell me what actual diagram to use to wire the power door locks?
Thanks
dfiddy 
Copper - Posts: 162
Copper spacespace
Joined: August 17, 2002
Location: Canada
Posted: December 01, 2004 at 10:25 PM / IP Logged  
Directechs says that they are positive lock and 5 wire unlock. Just 5 wire both lock and unlock and be done with it. Much easier and you dont have to worry about wiring it wrong. Hope that helps.
daniel2002p 
Silver - Posts: 524
Silver spacespace
Joined: October 10, 2003
Location: United States
Posted: December 01, 2004 at 10:28 PM / IP Logged  

reverse polarity and 5 wire mean the same thing, you can use this diagram.

https://www.the12volt.com/doorlocks/page3.asp#5w

2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
extreme1 
Silver - Posts: 1,070
Silver spacespace
Joined: February 12, 2003
Location: Canada
Posted: December 01, 2004 at 11:15 PM / IP Logged  
If the truck has a factory alarm, you can grab locks at the CTM (central timer module) it's right of the steering column. 1 wire (light GREEN/ orange) 644 ohms to lock, 1500 to unlock (two pulses) negative.
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Njnj 
Member - Posts: 7
Member spacespace
Joined: October 10, 2002
Posted: December 02, 2004 at 2:08 PM / IP Logged  
Nah, the truck doesnt have a factory alarm, so that shouldnt be a problem
Thanks for the help guys!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer