the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 neon engine light


Post ReplyPost New Topic
< Prev Topic Next Topic >
Falcon 1 
Copper - Posts: 130
Copper spacespace
Joined: November 15, 2003
Location: Canada
Posted: December 04, 2004 at 6:53 PM / IP Logged  
I installed a remote start in a 2004 dodge neon now I am getting the engine light staying on with remote or when started with key. I don't recall if the engine light was on before starting work on the car. Anyone have any ideas. Also its a bulldog remote starter.
Do it right the first time, only a doctor can bury his mistakes.
Sexified 
Copper - Posts: 87
Copper spacespace
Joined: October 17, 2004
Location: Canada
Posted: December 04, 2004 at 7:09 PM / IP Logged  
first have you powers all of the ignitions and the acc's?
if you did remove the (-) off the battery and let it sit for 20 min or so.
it should go away....providing it wasn't on before you began the install.
sweet.
Falcon 1 
Copper - Posts: 130
Copper spacespace
Joined: November 15, 2003
Location: Canada
Posted: December 04, 2004 at 7:12 PM / IP Logged  
I have wired all ignition wires and acc's to my knowledge. I will try disconnecting the battery.
Do it right the first time, only a doctor can bury his mistakes.
extreme1 
Silver - Posts: 1,070
Silver spacespace
Joined: February 12, 2003
Location: Canada
Posted: December 04, 2004 at 8:51 PM / IP Logged  
there is only one ign and one acc required on that car, pretty simple really.
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Falcon 1 
Copper - Posts: 130
Copper spacespace
Joined: November 15, 2003
Location: Canada
Posted: December 04, 2004 at 9:08 PM / IP Logged  
I disconnected the battery as Sexified suggested and the light is off and has not come back on even after taken the car for a ride. Thanks for your help.
Do it right the first time, only a doctor can bury his mistakes.
daniel2002p 
Silver - Posts: 524
Silver spacespace
Joined: October 10, 2003
Location: United States
Posted: December 04, 2004 at 11:14 PM / IP Logged  
disconnect the alarm and see if it still does it.
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer