790xv programming

Home / the12volt's Install Bay / Car Security and Convenience / 790xv programming (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

patmo

Member - Posts: 7

Joined: March 13, 2004

Location: Canada

Posted: December 09, 2004 at 5:03 PM / IP Logged

Hi,

I am able stop alarm with the valet switch but I am not able programming the remote control whit the valet switch.

please help!!

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: December 09, 2004 at 6:45 PM / IP Logged

the programming mode may have been "locked" with a bitwriter by the original installer....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

patmo

Member - Posts: 7

Joined: March 13, 2004

Location: Canada

Posted: December 09, 2004 at 8:02 PM / IP Logged

But the remote control do not make any function (not arm, not disarm ect...)

patmo

Member - Posts: 7

Joined: March 13, 2004

Location: Canada

Posted: December 09, 2004 at 8:08 PM / IP Logged

patmo wrote:

But the remote control do not make any function (not arm, not disarm ect...)

I don't connect the starter kill but the yellow wire on this relay is a connect on ignition or not a differance.

Autoobsession

Copper - Posts: 119

Joined: April 29, 2004

Location: United States

Posted: December 09, 2004 at 9:52 PM / IP Logged

To program the remote you must have Ignition 1 Connected to the Pink wire. Also the green or Purple wire for the door trigger must be connected.

Turn the key on and then press the valet button. Press it again and hold it. The siren should chirp once. Then press the lock button on the remote and the siren will sound. The remote is then programmed to the default settings.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: December 09, 2004 at 10:25 PM / IP Logged

try this, think its for 791xv reomtoe

Programming instructions:

Turn key on, hit valet button 8 times, press a ninth time and hold. Siren chirps 8 times....hit lock on remote. Release valet button.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: December 09, 2004 at 10:33 PM / IP Logged

If the alarm is locked with the bitwriter it should beep at you when you even attempt to go into programming. If the alarm acts like it is going into programming but not completing it then your remote could be bad, the alarm could be bad, or it could be locked(but like I said it shouldn't even let you get to the point of programming).

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

patmo

Member - Posts: 7

Joined: March 13, 2004

Location: Canada

Posted: December 10, 2004 at 7:31 AM / IP Logged

It,s possible unlocked whitout the bitwriter but it's a new alarm never installed in a car !!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

790xv programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.