the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 stratus R/T


Post ReplyPost New Topic
< Prev Topic Next Topic >
jaurora 
Silver - Posts: 429
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 16, 2004
Location: United States
Posted: December 17, 2004 at 3:08 PM / IP Logged  

I have a DEI module for the window roll up in this car (up and down). Note that this car is the R/T series, 2door. I want to install this module but I am having a very hard time trying to locate thaes wires. For some reasons the wires are totally different from the regular stratus and the coupe. Has anyone ever done this car? I already put the alarm and remote starter in. Even while doing that I had to "fly blind" because of the tech sheet that I had was for a stratus coupe and none of the wires even mached. I guess my question is, is there a tech sheet for the R/T version of this car and/or does anyone know the power window wire colors? There are about 8 wires in the driver side door which go into a small black controll box with a circut board in it. Is this even possable.

Thank you for any help and info that can be donate to help me in this strange situation.

MECP certified (If it really means anything)
Jeremy
daze 
Copper - Posts: 112
Copper spacespace
Joined: December 02, 2004
Posted: December 17, 2004 at 6:52 PM / IP Logged  
I doubt they strayed away from the same design, the drivers door window wires are gonna be in the door and the others are going to be in the drivers kick panel. Do you have a volt metter ? I will walk you through it.
jaurora 
Silver - Posts: 429
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 16, 2004
Location: United States
Posted: December 20, 2004 at 7:16 AM / IP Logged  
This is not the first time I have done a window roll up. I have done the regular dodge stratus and coupe models for R/S but the wires are different.
MECP certified (If it really means anything)
Jeremy
daze 
Copper - Posts: 112
Copper spacespace
Joined: December 02, 2004
Posted: December 21, 2004 at 7:03 PM / IP Logged  

the colors are different ? I guess your gonna have to do it the old fashion way, find the wires yourself using the metter

jaurora 
Silver - Posts: 429
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 16, 2004
Location: United States
Posted: December 22, 2004 at 10:32 AM / IP Logged  
For one I have tested all wires and none of them show either a ground or a + side when the windows are used. This is why I asked the question if it can be done. And by the way daze it is called a meter.
MECP certified (If it really means anything)
Jeremy

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 26, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer