killswitch

Home / the12volt's Install Bay / Car Security and Convenience / killswitch (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: December 19, 2004 at 9:45 PM / IP Logged

i would like a killswitch that breaks the starter wire when the ignition is off and needs the brake pedal depressed in order for the key to be able to engage the starter. does anyone have a diagram on this?thanks.

gcorrea

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: December 19, 2004 at 9:54 PM / IP Logged

Passive starter kill diagrams

Or basically, 85 ground, 86 +brake input, 30 one end of starter wire, 87 other end of starter wire.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: December 19, 2004 at 11:04 PM / IP Logged

whats best single relay or dual relay like in the passive starter diagram.

gcorrea

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: December 19, 2004 at 11:07 PM / IP Logged

Well the simplest is the one I wrote out. 1 relay 1 trigger. You could then go brake and horn to start the car by wiring horn to pin 85 and brake to 86.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: December 20, 2004 at 12:20 AM / IP Logged

cool thanks.auex

gcorrea

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

killswitch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.