96 GMC JImmy new alarm/remotestart prob.

Home / the12volt's Install Bay / Car Security and Convenience / 96 GMC JImmy new alarm/remotestart prob. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

turbovr6

Member - Posts: 14

Joined: September 19, 2003

Location: United States

Posted: December 22, 2004 at 3:49 PM / IP Logged

I need some help please. 1996 GMC Jimmy. I just installed a Designtech(I know, not the best) "Ready Start" system. I have installed alarms before, and I am an auto tech by trade. I went over my connections 4or 5 times. When I put the fuse in the alarm gets power. starts going off, and the remote will not shut it off. When it does finaly shut off I try the remote start and I hear the alarm module clicking like crazy(sounds like a turn signal is on), and thats it, it does'nt even attemp to start the truck. The truck has keyless entry, do I have to bypass this somehow? Thats the only thing I can think of that I am missing.

Thanks

turbovr6

Member - Posts: 14

Joined: September 19, 2003

Location: United States

Posted: December 22, 2004 at 4:29 PM / IP Logged

sorry about the double post!

turbovr6

Member - Posts: 14

Joined: September 19, 2003

Location: United States

Posted: December 22, 2004 at 5:06 PM / IP Logged

I sat on hold with tech support hotline for 1/2 hour, then hung up

Here is a pic of the wire diagram for the alarm

[IMG]http://www.turbovr6.net/sss.jpg[/IMG]

this is how I have it connected:

blue to pink on truck

yellow to yellow on truck

white to orange on truck

Pink to 12v constant

(skipping locks)

Black to ground

yellow to parking lights

white black to relay(-) for Ign.2

blue to siren

orange to white at pedal

white to relay

GREEN / WHITE to white on pin switch

green to white on coil

I did not install the hood pin yet, but the wire is not grounded, so that should not be a problem

turbovr6

Member - Posts: 14

Joined: September 19, 2003

Location: United States

Posted: December 22, 2004 at 5:08 PM / IP Logged

96 GMC JImmy new alarm/remotestart prob. -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

96 GMC JImmy new alarm/remotestart prob.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.