the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

96 GMC JImmy new alarm/remotestart prob.


Post ReplyPost New Topic
< Prev Topic Next Topic >
turbovr6 
Member - Posts: 14
Member spacespace
Joined: September 19, 2003
Location: United States
Posted: December 22, 2004 at 3:49 PM / IP Logged  

I need some help please. 1996 GMC Jimmy.  I just installed a Designtech(I know, not the best) "Ready Start" system.  I have installed alarms before, and I am an auto tech by trade.   I went over my connections 4or 5 times.  When I put the fuse in the alarm gets power. starts going off, and the remote will not shut it off.  When it does finaly shut off I try the remote start and I hear the alarm module clicking like crazy(sounds like a turn signal is on), and thats it, it does'nt even attemp to start the truck.  The truck has keyless entry, do I have to bypass this somehow?  Thats the only thing I can think of that I am missing.

 Thanks

Cudar1 
Member - Posts: 2
Member spacespace
Joined: December 22, 2004
Location: United States
Posted: December 22, 2004 at 7:55 PM / IP Logged  
Sounds like the remote is not programed for the alarm.  Try turning on the ignition first then putting the fuse in the alarm.  Then see if you can reprogram the alarm remotes.
Is it against the law? Yeah, Ohm's Law!
secureauto 
Copper - Posts: 196
Copper spacespace
Joined: January 02, 2003
Location: California, United States
Posted: December 22, 2004 at 10:12 PM / IP Logged  
After you get the remotes working, double check and make sure you got both Ignition wires and tach wire hooked up. On another note, I have a friend at Frys Electronics and he's had several problems with Designtech alarms not working properly.
Here's a link for the wiring diagram
96 GMC Jimmy
ASE Certified

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer