+ Parking Light Output from Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / + Parking Light Output from Remote Start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gccm

Member - Posts: 6

Joined: December 22, 2004

Posted: December 23, 2004 at 5:11 PM / IP Logged

I have DirectStart C423 Remote Car Starter with relayed a +12V output. The 2001 Chev Impala seems to have two (2) + wires for the parking lights at the switch (yellow for the front and BROWN / white for the rear). Any suggestions on how to wire this configuration?

Thanks,

Guy

Back to Top

audifive

Copper - Posts: 89

Joined: June 02, 2004

Location: United States

Posted: December 23, 2004 at 5:23 PM / IP Logged

use a relay and use the neg trigger (white wire at the bcm)

85- pos 12 from RS

86 and 87- ground

87a- white wire bcm side

30- white wire parking light relay side

Back to Top

gccm

Member - Posts: 6

Joined: December 22, 2004

Posted: December 23, 2004 at 5:33 PM / IP Logged

Thank you!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

+ Parking Light Output from Remote Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.