Need Help on Remote Start for 93 Nissan Maxima

Home / the12volt's Install Bay / Car Security and Convenience / Need Help on Remote Start for 93 Nissan Maxima (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gman4ever

Member - Posts: 8

Joined: October 19, 2002

Location: United States

Posted: October 19, 2002 at 4:56 PM / IP Logged

I am trying to install a CrimeStopper RS900IV remote start/keyless entry system on a 1993 Nissan Maxima GXE with keyless entry (bottons on door handles). I have the locks and trunk all done, but when I start with remote, the starter just keeps on running, while the engine is already started.

My Unit has a Tachless Mode. However, when I programed it, nothing changed. So I ran a tach wire from coil, and still, no avail. The unit even confirmed that it recieved a valid tach input signal by flasing the lights twice in TachFind mode. The starter just keeps on spinning. I have installed a Bulldog starter and keyless entry before, with no problems. But this is something different. Could it be a defective unit? Any help or info would be appreciated.

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: October 19, 2002 at 9:23 PM / IP Logged

I'll take a guess that you might have hooked up the starter wire as an ignition or accessory by mistake..... it couldn't hurt to go and check those connections again.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 19, 2002 at 9:42 PM / IP Logged

Were there any pin switches to turn OFF /ON the tachless and tach required mode ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: October 19, 2002 at 9:44 PM / IP Logged

Do you have an option like "anti-grind mode?" If you do make sure that it is on.

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

gman4ever

Member - Posts: 8

Joined: October 19, 2002

Location: United States

Posted: October 24, 2002 at 7:43 PM / IP Logged

Thanks for all your help. I found out that the wire harness on my unit was not pluged in the right way. I assumed that if it fits, then it is the right way, like many harnesses that have the special thread so you cant plug it in wrong. Well anyways, the ACC was going to the starter and the Starter was going to the accesories. I fliped over the harness plug and it works great.

djfearny2

Silver - Posts: 810

Joined: September 23, 2002

Location: United States

Posted: October 24, 2002 at 8:18 PM / IP Logged

yea you got to make sure that dont happen you could have messed up starter.,

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Need Help on Remote Start for 93 Nissan Maxima

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.