the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

open doors with alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
1low97s10 
Member - Posts: 3
Member spacespace
Joined: May 09, 2004
Location: United States
Posted: January 01, 2005 at 10:02 PM / IP Logged  
i am going to shave the door handles off my s10. i got the 35lbs actuators and two relays to be used with alarm system as i was told. but i am not sure how to hook them up to my alarm? i have a viper 791xv. thanks eric.
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: January 01, 2005 at 10:18 PM / IP Logged  
you will use the trunk release for one door and you can use the second channel for the other door.
the outputs most of the time are - outputs....depending on what polarity you need for the door poppers, will dictate how you wire up the relays.....
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
bigjeep 
Member - Posts: 24
Member spacespace
Joined: January 02, 2005
Location: United States
Posted: January 02, 2005 at 9:04 PM / IP Logged  
well are the outputs on the alarm neg. pulse? if so you can wire up the popers two ways. i recomend hooking the white wire to 12v. and then using a relay to pop the door. wire the relay so, 87  to ground, 85 to 12v, 86 to the output from the alarm, and 30 to the black wire on the poper.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer