'Alarm' Light Flash

Home / the12volt's Install Bay / Car Security and Convenience / 'Alarm' Light Flash (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nicad

Member - Posts: 2

Joined: January 05, 2005

Location: Canada

Posted: January 08, 2005 at 5:25 PM / IP Logged

All information here.

https://www.the12volt.com/relays/page4.asp

The problem I'm having is wiring the light flash on the car alarm wire which has a {-}200mA output to a SPDT relay from ----
it lights the parking lights and my turn signal flashes them too. With each side having seperate circuits I read and used two SPDT relays that made no switching either.
I used three SPDT relays and wired them for a two wire light flsh and the alarm had no power when used with the transmitter. I beleive it happened with the two relays too. The relays are new and wiring is OK
What should be done.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 08, 2005 at 6:34 PM / IP Logged

Help me understand, and maybe help you

What kind of car is it........? And are you SURE your alarm cannot be programmed for a (+)POS light flash?

Back to Top

nicad

Member - Posts: 2

Joined: January 05, 2005

Location: Canada

Posted: January 08, 2005 at 7:59 PM / IP Logged

The alarm has a selectable output and systems that use 10amps and up use the {-]output like for this car. Is this wiring showing the same use... 'negative output to a positive output' like the basic light flash

https://www.the12volt.com/relays/page1.asp

Would it work. 89' vw cabriolet
What should be done.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'Alarm' Light Flash

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.