96 s10 remote start

Home / the12volt's Install Bay / Car Security and Convenience / 96 s10 remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

gump2388

Member - Posts: 8

Joined: January 12, 2005

Posted: January 12, 2005 at 5:45 AM / IP Logged

got a 96 s10 with remote start. i wired my self and i must have miss something when i hit the button it shifts funny. when i start with the key its fine. what wire did i miss. also on the ignition 2 wire i use the red with white strike. thats the only one i found that had 12 volts when in start mode. thanks

promodeepcycle

Copper - Posts: 152

Joined: October 17, 2003

Location: United States

Posted: January 12, 2005 at 6:50 AM / IP Logged

either you missed tagging the white wire. for 2nd ign or they are "lighting" up in the wrong order

dont be a pet monkey ..use your dmm

Search for other posts by promodeepcycle

JiggaFan

Copper - Posts: 71

Joined: February 20, 2003

Location: United States

Posted: January 12, 2005 at 10:17 AM / IP Logged

is the check engine light on when you remote start it?

i missed an ignition wire when i did my first S-10. stupid Omega (internet was down that day) labels the "Accessory" wire (orange, I think) as the "2nd ignition". so I wasn't "lighting" the 2nd ignition wire at all.

gump2388

Member - Posts: 8

Joined: January 12, 2005

Posted: January 12, 2005 at 3:10 PM / IP Logged

ok on my s10 i had to probe for the pink/white wire. it was the only wire to have 12 volts in the run and start of the switch. so what i need to change about it??

Craig3708

Copper - Posts: 155

Joined: January 30, 2004

Location: Canada

Posted: January 12, 2005 at 3:30 PM / IP Logged

Chevrolet

S-10 Pickup

1996-2003

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	YELLOW	IGNITION SWITCH HARNESS **
Ignition #1:	PINK	IGNITION SWITCH HARNESS
Ignition #2:	PINK/WHITE OR WHITE	IGNITION SWITCH HARNESS (ECM)***
Ignition #3:	N/A
Accessory:	ORANGE	IGNITION SWITCH HARNESS

Craig3708

Copper - Posts: 155

Joined: January 30, 2004

Location: Canada

Posted: January 12, 2005 at 3:30 PM / IP Logged

All 3 wires in the above post need to be powered up.

gump2388

Member - Posts: 8

Joined: January 12, 2005

Posted: January 12, 2005 at 3:37 PM / IP Logged

i got it wired like that but the pink/white wire is not there. the one i used is red with a white stripe. the only pink one it to ignition 1 and i used the red with white stripe to ignition 2. the check engine comes on when i start with remote. anyone else have a 96 that can tell me how they wired theres being they didnt have a pink and white one or just a plain white one.

gump2388

Member - Posts: 8

Joined: January 12, 2005

Posted: January 12, 2005 at 3:44 PM / IP Logged

ok ok wait i got a diagram from bulldog security (same as my remote start) and its got the purple wire as a start wire. is that my problem??

Craig3708

Copper - Posts: 155

Joined: January 30, 2004

Location: Canada

Posted: January 12, 2005 at 3:49 PM / IP Logged

If it remote starts you have the right start wire. But you should have 2 ign wires and a acc wire. If these three wires are not powered up you will have problems. I did a 2002 S10 last week and the wiring was the same as the wiring at this link.

http://www.designtech-intl.com/Content/techsupport/wirecolors/VehicleDetail?modelID=281

Good Luck

Craig.

gump2388

Member - Posts: 8

Joined: January 12, 2005

Posted: January 12, 2005 at 4:11 PM / IP Logged

man i dont know what my problem is. only thing i see is that i used a red with white stripe instead of the pink and white. i dont have a pink and white stripe or a white one. it remote starts fine just the transmission shifts funny.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.