2003 Honda Accord R/S Problem

Home / the12volt's Install Bay / Car Security and Convenience / 2003 Honda Accord R/S Problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

TimeforBAss

Member - Posts: 3

Joined: December 12, 2004

Location: United States

Posted: January 29, 2005 at 1:08 PM / IP Logged

I install a remote start in this car and everything worked fine. The car came back so that I could install the power trunk and after I installed the trunk the car starts but has a check engine light. I used a probe and found the error codes and tried to erase them. After the erase finished the codes returned. The car starts but has no throttle responce and the fan stays on. any help?

Back to Top

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: January 29, 2005 at 1:36 PM / IP Logged

Did this problem happen after you installed the trunk release? Did you use T-Taps or solder? If you used t-taps make sure all of your wires are still connected. Make sure all ignition, and acc. wires are powered during remote start.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Back to Top

TimeforBAss

Member - Posts: 3

Joined: December 12, 2004

Location: United States

Posted: January 29, 2005 at 1:46 PM / IP Logged

yes this happened after I installed the trunk release and I soldered the connection. I removed the remote start from the car and the car still does the same thing. Is there a special way to erase the error codes that I am missing?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Honda Accord R/S Problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.