Avital 2200, 451M DEI Lock solenoid?

Home / the12volt's Install Bay / Car Security and Convenience / Avital 2200, 451M DEI Lock solenoid? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dynotuned

Member - Posts: 5

Joined: January 26, 2005

Location: United States

Posted: January 30, 2005 at 3:44 PM / IP Logged

I have an old avital 2200 that I am currently trying to wire into a car of mine right now that I got out of a parts car and it doesn't have any instructions to go along with it. I am doing good enough without it but I have a few questions. One, is the Starter Kill relay built into this model, and if so, are the two black wires the part of the starter kill coming out of the box. Second, I was wondering if any of you knew how to wire in the 451M door lock relay to this box and the two aftermarket lock solenoids that i have? Thankyou

Back to Top

kiteman

Copper - Posts: 98

Joined: January 14, 2004

Location: United States

Posted: January 30, 2005 at 5:27 PM / IP Logged

If you have 2 black wires coming out of the box by them self, that is the starter kill wires does not matter which side goes to which. on the 451. the purple wires are the 12v, then you should have a grn, grn/blk, blu, blu/blk. the grn and the blue go to the aftermarket locks and the grn/blk and the blu/blk go to ground.

Back to Top

dynotuned

Member - Posts: 5

Joined: January 26, 2005

Location: United States

Posted: January 31, 2005 at 10:18 AM / IP Logged

Thankyou for your help, That is all i needed.

Back to Top

dynotuned

Member - Posts: 5

Joined: January 26, 2005

Location: United States

Posted: January 31, 2005 at 10:38 AM / IP Logged

actually the wires out of the 451m are WHITE/ black BROWN / black blue/black BROWN / black and two PURPLE / black that link at a fuse that i don't know where they go. I have the the 3 small wires plugged into the box. I have after market 2-wire actuaters and was wondering how these wires go to the actuators. This is what it says on the back of the relay:

PURPLE / black - lock/unlock normally open#87

GREEN/ black- lock output#30

WHITE/ black- lock normally closed #87a

blue/black- unlock output #30

BROWN / black- unlock normally closed #87a

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Avital 2200, 451M DEI Lock solenoid?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.